Из usersguide:
"ANALOG INPUT/OUTPUT CALIBRATION
Calibration levels for the Analog Inputs and Outputs are set with internal jumpers. A “block” of 6 jumpers offers 3 level settings for each input and output channel. The locations of these jumpers are indicated in FIGURE 3.
Internal Adjustments
FIGURE 3
JUMPER
(as seen from front)
ANALOG
Reference Level
DIGITAL
Reference Level
-10 dBV
-13 dBfs
+4 dBu
-16 dBfs
+4 dBu
-20 dBfs
FIGURE 4
JUMPER P3
(as seen from front)
DESCRIPTION
When AC power is applied to the input, the unit does not power up immediately; to power on the unit,the POWER button must be pressed.
When AC power is applied to the input, Rosetta 800 powers on immediately; nevertheless, the POWER switch is functional.
FIGURE 5
POWER SWITCH CALIBRATION
FIGURE 4 depicts the reference analog and digital levels obtained when applying a shunt to each pair of jumpers. For example, when a shunt is applied to the middle pair of each input and output “block”, a +4 dBu analog input results in a –16 dBFs digital output, while a –16dBFs digital input results in a +4 dBu analog output."
-10 dBV и +4 dBu по аналогу понятно, а что значит:
"DIGITAL
Reference Level
-10 dBV
-13 dBfs
+4 dBu
-16 dBfs
+4 dBu
-20 dBfs" т.е.-16 dBfs и 20 dBfs?
Еще, : стал заворачивать крышку- потерял два винта.
Как я понимаю у них особый шаг резьбы как и у Digi .
А там конструкция такая , если кто не видел(ROSETTA 800) -целиковая - прочность от всех винтов зависит.
Без них в рек ее повесить волнительно как-то.
Тишина в студии!!! Внимание вопрос знатокам
:
Где в Москве можно купить такие винтики?
Заранее спасибо за ответы.