Che1366 писал(а):
Да давно уже WinXP и Logic 5.5.1. и amt8+unitor 8 MkI + сколь нибудь еще имэйжиковских интерфейсов докуплю.
А вот на ГОЛУЮ винду как поставить unitor через com порт? Он в диспетчере устройств появляется когда его подключаешь? У меня просто ничего в диспетчере задач не появляется, не при горячем подключении, ни после перезагрузки.
У меня под ХР по нижеприведённому сценарию поставился АМТ8 без проблем. Pro Tools 6.4.1 его видит и распознаёт. При подключении без дров винда его не видит и не распознаёт.
Connect the Emagic Unitor8- AMT8 and MT4 Unitor FAmily to your computer.
Turn on your computer. When the Unitor8- AMT8 and MT4 Unitor FAmily is first connected to the your computer, the Windows dialog called "Add New Hardware Wizard" will appear automatically. (To display this dialog manually, you can choose the Start button and then Settings to access the Control Panel, and then double click on Add New Hardware. The Emagic Unitor8- AMT8 and MT4 Unitor FAmily needs to be connected first.)
The Add New Hardware Wizard dialog box guides you through the driver installation process. Click on Next to move from step to step.
A dialog states "Windows will now search for any new Plug and Play devices on your system". Click Next.
A subsequent dialog gives you these options: Search for the best driver for your Unitor8- AMT8 and MT4 Unitor FAmily (Recommended) Display a list of all drivers in a specific location, so you can select the driver you want. Please accept the recommended choice by clicking on Next.
The Wizard will then search your hard drive for a file called ..... *****.inf (for example Unitor8- AMT8 and MT4 Unitor FAmily.inf). This file contains all the information that Windows needs to install the correct device drivers.
If during installation in Windows, you will be prompted with a message warning that the driver software has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Emagic, and safe to use.
When you see the Completing the Found New Hardware Wizard screen, click Finish to complete the driver installation.